Nowy Maszyna do ścielenia słomy Ballenauflöser 2in1 Stroheinstreugerät / Bedding Maschine GTH-SIR IV

We are a manufacturer of agricultural, construction, forestry and municipal machinery.

We cordially invite you to contact us and visit our website grutech.pl

PRICE MODELS Basic

• Construction made of S355 steel

• Non-brand bearings, usually Czech or other

• Gopart or zychyd engines

• Gates Premium tubing

• GTH-SIRH Basic IV 1.2-1.6 m model with automatic hydraulics connection two-sided connection 5330 euro net

• GTH-SIRH3 Basic IV 1.2-1.6 m model with automatic hydraulic connection three-sided connection 5570 euro net

• GTH-SIR Basic IV 1.2-1.6m model with manual connection of hydraulic lines connection on both sides 4738 euro net

• GTH-SIR3 Basic IV 1.2-1.6m model with manual connection of hydraulic lines three-sided connection 4880 euro netto

PRICE

• Real-time belt speed adjustment system from the operator’s cabin, additionally paid Plus 863 euro net Model GTH-SIRHR

• Models for bales 1.2-1.8 plus 588 euro netto .

• 850 mm disc litter adapter instead of the horizontal rotor on springs plus 648 euro GTH-SIRHT model

• Machine without a bedding adapter Model GTH-RB/ GTH-RBH manual cable connection 666 for Basic models and 768 euro netto for

Premium models

•• Cover bending is necessary when bedding from the feed corridor 400 euro netto

MACHINE DESCRIPTION:

The 2-in-1 GTH-SIRH bale spreader, in two versions

of the fourth generation, is a device for unfolding and

spreading straw bales as well as for unfolding and

distributing haylage from the bale. It is perfect for

drive-through barns, deep-litter barns, and free-stall

barns. in poultry houses, and even when mulching

strawberry plantations.

TECHNICAL DATA:

• Toothed spreader-rotor:

• Straw bedding at a distance of up to 8 m, depending on the machine

setting and straw quality.

• Disc spreader:

• Bedding with a wider radius at a distance of up to 4 m.

• Oil consumption: 140-220 bar and minimum 25-110 l / min this

option is selected individually.

• Connecting the machine with a frame for loading bales in three

positions.

• The amount of the litter straw or the set silage is regulated by a

potentiometer.

• Quick change from bedding to unrolling silage by raising the spreader

arm to the upper position and turning the valve lever.

• The design of the spreader minimizes the fall of straw under the

machine, in strict cases, the possibility of installing special covers.

• The bedding machine can be equipped with an automatic hydraulic

power connection system (i.e. hydraulic lines without leaving the

tractor or loader).

• Such a system significantly improves work.

• With one machine (tractor or loader), we will load the bale and

spread it after leaving the machine only once in order to remove the

net or twine from the bale.

• The structure of the Bedding Machine is designed for continuous

operation.

• As standard, all models are equipped with a limiter frame to determine

the amount of litter, the advantage of using the limiter is that each

bale is unrolled to the end.

• Each machine is checked and pre-set

• Powder painting.

• Each model can be retrofitted with additional available accessories

at any time without any problems and effort